We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062106
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 100 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822062106, connect FAMAGA, the world's central provider of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each buyer. We understand everyone, who collaborated with us - therefore, our regular customers bring in the most helpful purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Lebanon, Congo, Ghana, South Sudan, Peru, Antigua and Barbuda, Thailand, Guinea, Romania, Uganda, Norway, Slovakia, Tunisia, Poland, Senegal, Egypt, Gambia, Suriname, Uzbekistan, Czech Republic, Central African Republic, Rwanda, Lithuania, Netherlands, Kazakhstan, Saudi Arabia, Bangladesh, China, Monaco, Sudan, Cameroon, Iraq, Russia, Malaysia, Greece, Qatar, Bosnia and Herzegovina, Belize, Moldova, Iceland, South Korea, Tanzania, Denmark, Argentina, Malta, Jordan, Togo, Montenegro, United States. A advanced logistics system and a partnership network allow us to ship our units anywhere in the world promptly without undermining product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |