We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822245403
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822245403, call FAMAGA, the world's influential distributor of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each purchaser. We admire everyone, who joined with us - therefore, our regular purchasers get the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Portugal, Bahrain, Kiribati, Brunei, Lebanon, Bhutan, Vietnam, Ireland, Thailand, Hungary, Liechtenstein, Togo, Nicaragua, Grenada, Sierra Leone, Montenegro, Mauritania, Burundi, Uruguay, Angola, Gambia, Argentina, Malta, Belize, Cameroon, Mali, Rwanda, Zambia, Kazakhstan, Greece, Ukraine, Armenia, Kuwait, Paraguay, Sudan, Slovakia, Guatemala, Australia, Benin, Lithuania, Czech Republic, Andorra, Central African Republic. A well-elaborated logistics connection and a partnership network let us to ship our units anywhere in the globe quickly without compromising product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |