We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627665
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480627665, reach FAMAGA, the world's key producer of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each user. We admire everyone, who worked with us - therefore, our regular buyers bring in the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Japan, Hungary, Lesotho, Malta, Ireland, Swaziland, Uruguay, Ukraine, Mauritania, Guyana, Bolivia, Lebanon, Jordan, Guinea, Morocco, Armenia, Liechtenstein, Estonia, Tanzania, Senegal, Zambia, India, Laos, Montenegro, Uganda, Austria, Sierra Leone, Ghana, Slovakia, Rwanda, Antigua and Barbuda, Algeria, United Arab Emirates, Australia, Kuwait, North Korea, Brunei, Kazakhstan, Sudan, Mali, Vietnam. A well-built logistics system and a partnership network allow us to dispatch our elements anywhere in the world on-time without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that users choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |