Aventics (brand of Emerson) R414001200
  Aventics (brand of Emerson) R414001200

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R414001200 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R414001200

Description

Housing Die-cast aluminum,Steel
Sealing material Hydrogenated acrylonitrile butadiene rubber
CE declaration of conformity
Protection class IP65
Port size via signal connection
Nominal flow Qn 120 l/min
Hysteresis < 0.02 bar
Compressed air connection input G 1/8,1/8 NPT
Compressed air connection output G 1/8,1/8 NPT
DC operating voltage 24 V

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R414001200

If you are inspecting Aventics (brand of Emerson) R414001200, connect FAMAGA, the world's chief provider of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and individual attention to each buyer. We admire everyone, who collaborated with us - therefore, our regular buyers pick up the most acceptable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the globe . A well-developed logistics link and a partnership network allow us to conduct our units anywhere in the earth promptly without compromising product quality.

A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.

All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.

To ask a question or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features R414001200

Version Poppet valve
Mounting orientation ±α = 0 ... 90° ±β = 0 ... 90°
Certificates CE declaration of conformity
Working pressure max See table
Ambient temperature min./max. 0 ... 50 °C
Medium temperature min./max. 0 ... 50 °C
Compressed air connection input G 1/8 1/8 NPT
Compressed air connection output G 1/8, 1/8 NPT
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 1 mg/m³
Nominal flow Qn 120 l/min
Control Analog
DC operating voltage 24 V
Voltage tolerance DC -20% / +20%
Permissible ripple 5%
Max. power consumption 300 mA
Protection class IP65
Weight 0,32 kg
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
With oil-free, dry air, other installation positions are possible on request. ED02 series valves can be assembled into blocks using tie rods (see accessories). The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. The compressed air connection threads fit both G 1/8 and 1/8 NPTF.
Material
Housing Die-cast aluminum Steel
Seals Hydrogenated acrylonitrile butadiene rubber