Aventics (brand of Emerson) R412000225
  Aventics (brand of Emerson) R412000225

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R412000225 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R412000225

Description

Actuating control double solenoid
Return type With spring return
Switching principle 5/3
Version Spool valve, positive overlapping
Housing Aluminum,Polyamide fiber-glass reinforced
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Connector standard EN 175301-803:2006
Protection class IP65
Number of wires 3-pin
Port size EN 175301-803, form A
Type Plug
Qn 1▶2 3600 l/min
Qn 2▶3 4100 l/min
Compressed air connection input G 1/2
Compressed air connection output G 1/2
Operational voltage AC at 50 Hz 110 V
Operational voltage AC at 60 Hz 110 V
Activation Electrically

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R412000225

If you are questing Aventics (brand of Emerson) R412000225, communicate with FAMAGA, the world's key producer of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each consumer. We understand everyone, who worked with us - hence, our regular purchasers obtain the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world . A well-elaborated logistics bond and a partnership network cheer us to ship our goods anywhere in the globe quickly without discrediting product quality.

A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.

All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.

To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R412000225

Version Spool valve, positive overlapping
Activation Electrically
Sealing principle Soft sealing
Working pressure min./max. See table
Control pressure min./max. See table
Ambient temperature min./max. See table
Medium temperature min./max. See table
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 1 mg/m³
Nominal flow Qn See table
Nominal flow 1 ▶ 2 See table
Nominal flow 2 ▶ 3 See table
Compressed air connection according to ISO 228-1
Pilot control exhaust with directional pilot air exhaust
Connector standard EN 175301-803:2006
Reverse polarity protection Protected against polarity reversal
Compatibility index See table
Duty cycle 100 %
Weight See table
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. *Note: Basic valves feature a maximum working pressure of 16 bar. When combined with standard CNOMO pilots, the maximum working pressure is 10 bar.
Material
Housing Aluminum Polyamide fiber-glass reinforced
Seals Acrylonitrile butadiene rubber Polyurethane