We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300865
Description
| Parts | Filter pressure regulator |
| Condensate drain | fully automatic, open without pressure |
| Relieving exhaust | with relieving air exhaust |
| filter porosity | 8 µm |
| inspection glass | with window |
| Housing | Die-cast aluminum |
| Reservoir | Die cast zinc |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 15000 l/min |
| Compressed air connection | G 1 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) 0821300865, communicate with FAMAGA, the world's major supplier of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each client. We esteem everyone, who cooperated with us - therefore, our regular purchasers accept the most favorable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Malta, Belgium, Zimbabwe, Ghana, Croatia, Colombia, Qatar, Burma, Israel, Lithuania, Malawi, United Arab Emirates, Algeria, Cameroon, Jamaica, Antigua and Barbuda, Swaziland, Chad, Haiti, Slovakia, Kenya, Hungary, El Salvador, Burundi, Fiji, Laos, Bolivia, Libya, Ireland, Uruguay, Seychelles, Bangladesh, Burkina Faso, Kazakhstan, Vietnam, Namibia, Panama, Togo, Macedonia, Chile, Tonga, Sudan. A well-built logistics system and a partnership network cheer us to send our units anywhere in the planet with no delay without disreputing product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Version | 1-part, Can be assembled into blocks |
| Parts | Filter pressure regulator |
| Mounting orientation | vertical |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 1,5 ... 16 bar |
| Ambient temperature min./max. | -10 ... 60 °C |
| Medium temperature min./max. | -10 ... 60 °C |
| Medium | Compressed air Neutral gases |
| Nominal flow Qn | 15000 l/min |
| Regulator type | Diaphragm-type pressure regulator |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | 0,5 ... 10 bar |
| Pressure supply | single |
| Filter reservoir volume | 125 cm³ |
| Filter element | exchangeable |
| Condensate drain | fully automatic, open without pressure |
| Max. Internal air consumption | 0,5 l/min |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Mounting: mounting bracket 1821336017 / block assembly kit 1827009593 | |
| Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
| Material |
|---|
| Housing | Die-cast aluminum |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Reservoir | Polycarbonate Die cast zinc |
| Filter insert | Polyethylene |
