We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019824
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412019824, make contact with FAMAGA, the world's leading company of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are portrayed in the quality of goods and private attention to each orderer. We praise everyone, who cooperated with us - thus, our regular clients pick up the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Equatorial Guinea, East Timor, Hungary, Monaco, Denmark, Iraq, Qatar, Liberia, Congo, Bahamas, Kazakhstan, Tanzania, Jordan, Thailand, Eritrea, Oman, Libya, Bhutan, Guinea, Bangladesh, Swaziland, Norway, Zambia, Malta, Argentina, Guyana, Tunisia, Ecuador, Uganda, Tonga, South Sudan, Lithuania, China, Ghana, Burkina Faso, Algeria, Brunei, Azerbaijan, Madagascar, Albania, Nigeria, Paraguay, Mongolia, Samoa, Iran, Egypt, Chile, Uruguay, Namibia, Cape Verde. A well-elaborated logistics bond and a partnership network guide us to ship our goods anywhere in the world on-time without undermining product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To get some advice or make a request, contact us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |