We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063102
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 30 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822063102, connect FAMAGA, the world's top vendor of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and particular attention to each purchaser. We appreciate everyone, who worked with us - therefore, our regular customers obtain the most acceptable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Armenia, Azerbaijan, Indonesia, Belgium, Bosnia and Herzegovina, Samoa, Zimbabwe, Montenegro, Malaysia, Tanzania, Myanmar, Central African Republic, Afghanistan, Vietnam, Seychelles, Kenya, Czech Republic, Malawi, Angola, Equatorial Guinea, Yemen, Bangladesh, Mauritania, Australia, South Korea, Iraq, Nepal, Burundi, Namibia, Ghana, Niger, Iran, Brazil, Tonga, United States, Ukraine, Libya, Laos, Lithuania, Madagascar, Nigeria, Eswatini. A advanced logistics chains and a partnership network allow us to ship our products anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |