We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627556
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627556, get in touch with FAMAGA, the world's chief retailer of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each buyer. We respect everyone, who liased with us - so, our regular consumers obtain the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Togo, Ukraine, Afghanistan, Bahamas, Bhutan, Sweden, Qatar, Burkina Faso, Bolivia, Uruguay, Honduras, Equatorial Guinea, Cape Verde, Brunei, Serbia, Turkey, Nigeria, Mexico, Hungary, El Salvador, Vietnam, Laos, Luxembourg, Fiji, Yemen, The Bahamas, Philippines, Liechtenstein, Finland, India, Guyana, Georgia, Australia, Zimbabwe, Niger, United States, Morocco, Mauritania, Kyrgyzstan, Angola, Senegal, Kuwait, Andorra, Indonesia, Rwanda. A well-shaped logistics series and a partnership network guide us to ship our units anywhere in the planet with no delay without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Trunnion mounting | Nodular graphite iron |
Tie-rods | Stainless steel |