We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822244409
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822244409, catch up with FAMAGA, the world's foremost company of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each orderer. We appreciate everyone, who engaged with us - thus, our regular consumers accept the most convenient purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Samoa, Lithuania, Suriname, Netherlands, Slovenia, Sri Lanka, Lebanon, Cape Verde, Indonesia, Finland, Cuba, Guyana, Canada, Benin, East Timor, Guatemala, Equatorial Guinea, Moldova, Morocco, Montenegro, Panama, Peru, Slovakia, Ireland, Azerbaijan, Malaysia, Mauritius, Jamaica, Togo, North Korea, Belarus, Namibia, Switzerland, Sierra Leone, Philippines, Austria, Seychelles, Tajikistan, Latvia, Turkey, United Arab Emirates, Sudan, Haiti, Armenia, Syria, Senegal. A advanced logistics network and a partnership network allow us to dispatch our goods anywhere in the world with no delay without undermining product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To request or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |