We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637851
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 15524 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637851, reach FAMAGA, the world's central vendor of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and particular attention to each purchaser. We admire everyone, who cooperated with us - thus, our regular purchasers bring in the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly sign new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Zambia, Armenia, Belize, Gambia, Belgium, Guinea, Iran, Mongolia, Switzerland, Tunisia, Mauritius, Malta, United Arab Emirates, Tanzania, Bosnia and Herzegovina, Tonga, The Gambia, East Timor, Libya, The Bahamas, Liberia, Chile, Laos, Austria, Argentina, Central African Republic, Cameroon, Russia, Namibia, Senegal, Bangladesh, Mozambique, Thailand, Serbia, Nigeria, Kazakhstan, Greece, Guatemala, Equatorial Guinea, Afghanistan, Bulgaria, Croatia, Ghana, South Korea. A advanced logistics network and a partnership network guide us to conduct our elements anywhere in the earth on-time without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or book, contact us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |