We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019803
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 20 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412019803, reach FAMAGA, the world's foremost supplier of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each buyer. We appreciate everyone, who cooperated with us - so, our regular clients pick up the most convenient purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Gabon, Barbados, Afghanistan, Poland, Singapore, Cape Verde, Vietnam, Philippines, Honduras, Comoros, Niger, Russia, Peru, Nicaragua, Finland, Moldova, Ireland, Tunisia, Pakistan, Iceland, Oman, El Salvador, Costa Rica, Norway, United Arab Emirates, Suriname, Eritrea, Mexico, Zimbabwe, Yemen, Uzbekistan, Albania, India, Brunei, South Sudan, Qatar, Sudan, Libya, Mozambique, Tajikistan, Madagascar, Iran, Bolivia, Sierra Leone, Georgia, Lithuania, The Gambia, Uganda. A well-developed logistics chains and a partnership network let us to send our products anywhere in the globe with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To consult or order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |