We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300853
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
Pressure gauge | with pressure gauge |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821300853, catch up with FAMAGA, the world's dominant retailer of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and particular attention to each customer. We esteem everyone, who liased with us - therefore, our regular buyers receive the most helpful purchase forms and discounts on the factory-made equipment market. Now, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Mali, Mauritius, Azerbaijan, Liberia, Indonesia, Burma, Burkina Faso, Myanmar, Bulgaria, Georgia, Vietnam, Zimbabwe, Denmark, Norway, Malawi, Cape Verde, The Bahamas, India, Switzerland, Bangladesh, Uzbekistan, Cyprus, Andorra, Australia, Austria, Iran, Russia, Argentina, Finland, Swaziland, Tonga, Ecuador, Tunisia, Macedonia, Dominica, Central African Republic, Bolivia, Bosnia and Herzegovina, Malta, Chile, Lithuania, Yemen, Greece, Nigeria. A well-developed logistics link and a partnership network assist us to ship our units anywhere in the planet with no delay without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, get in touch with us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 15000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 125 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 0,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Mounting: mounting bracket 1821336017 / block assembly kit 1827009593 | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |