We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472404354
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 450 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7472404354, make contact with FAMAGA, the world's main provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of goods and particular attention to each consumer. We cherish everyone, who collaborated with us - thus, our regular customers receive the most attractive purchase terms and discounts on the factory-made equipment market. Today, there are more than 4500 such clients, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Burma, Sudan, Cape Verde, East Timor, Panama, Austria, Jamaica, Niger, South Korea, India, Algeria, Oman, Kyrgyzstan, Palestine, Belgium, Seychelles, Malawi, Gambia, Iran, Angola, Costa Rica, El Salvador, Burundi, Rwanda, Equatorial Guinea, Senegal, South Sudan, Argentina, Bangladesh, Morocco, Tanzania, Greece, Zambia, Ecuador, Belize, Samoa, Eswatini, Armenia, Turkey, Hungary, Paraguay, Tunisia, Ghana, Czech Republic. A well-shaped logistics bond and a partnership network cheer us to conduct our items anywhere in the globe promptly without damaging product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as stay in control.
To ask a question or order, contact us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |