We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822343904
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822343904, contact FAMAGA, the world's chief company of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each customer. We cherish everyone, who cooperated with us - hence, our regular purchasers bring in the most convenient purchase terms and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Monaco, San Marino, Greece, Guinea-Bissau, India, Kuwait, Tanzania, Seychelles, Ghana, Samoa, Belgium, Uzbekistan, Indonesia, Eritrea, Senegal, Fiji, Angola, Mauritius, Andorra, Guinea, Tonga, Qatar, Netherlands, Madagascar, The Bahamas, Dominica, Malta, South Korea, Guyana, Algeria, Estonia, Mauritania, Guatemala, Croatia, Malaysia, Slovakia, Cape Verde, Pakistan, Syria, Afghanistan, Swaziland, United Arab Emirates, Morocco, Brunei. A advanced logistics system and a partnership network assist us to ship our units anywhere in the world on-time without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or place an order, phone us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |