We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013717
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412013717, call FAMAGA, the world's principle retailer of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are portrayed in the quality of goods and private attention to each orderer. We value everyone, who engaged with us - so, our regular purchasers pick up the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Belize, Myanmar, Egypt, Palestine, Finland, Bangladesh, Congo, Cape Verde, Bulgaria, Nepal, Niger, Eritrea, Angola, New Zealand, Liechtenstein, Sweden, Tunisia, Tonga, Burma, Togo, Monaco, Bolivia, Ukraine, Australia, Burundi, Sierra Leone, Vietnam, Kazakhstan, Jordan, Azerbaijan, Greece, Libya, Kyrgyzstan, Norway, Kenya, Seychelles, Lithuania, Slovakia, Bosnia and Herzegovina, Thailand, Uganda, India, Equatorial Guinea, Uruguay. A well-elaborated logistics bond and a partnership network allow us to ship our goods anywhere in the earth immediately without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as keep on top of it.
To get some advice or make a request, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |