We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013715
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412013715, catch up with FAMAGA, the world's principle retailer of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are symbolized in the quality of merchandises and particular attention to each orderer. We esteem everyone, who engaged with us - hence, our regular clients pick up the most flexible purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Nigeria, Georgia, El Salvador, Tanzania, Cameroon, Guatemala, Indonesia, Zambia, Sierra Leone, Gambia, Suriname, The Gambia, Burundi, Singapore, Nepal, United Arab Emirates, East Timor, Sweden, Philippines, Liechtenstein, Pakistan, Laos, Syria, Central African Republic, Cape Verde, Djibouti, South Sudan, Morocco, Angola, Latvia, Panama, Tajikistan, Andorra, Comoros, Moldova, Mozambique, Tunisia, Brunei, Ghana. A well-built logistics bond and a partnership network let us to conduct our goods anywhere in the planet with no delay without undermining product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To request or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |