We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000327
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402000327, catch up with FAMAGA, the world's key vendor of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of outcomes and private attention to each purchaser. We appreciate everyone, who conspired with us - therefore, our regular purchasers receive the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Pakistan, Denmark, North Korea, Cape Verde, United Arab Emirates, Kyrgyzstan, New Zealand, Ireland, Grenada, El Salvador, Algeria, Andorra, Malaysia, Uzbekistan, Sudan, India, Eritrea, Iraq, Tanzania, Georgia, Slovakia, United States, Bosnia and Herzegovina, Zimbabwe, Lithuania, Laos, Equatorial Guinea, Tonga, Iran, Kiribati, Cameroon, Togo, Senegal, South Korea, Montenegro, Panama, Uruguay, Nepal. A well-built logistics chains and a partnership network cheer us to dispatch our products anywhere in the world promptly without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |