We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300856
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
Pressure gauge | with pressure gauge |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821300856, connect FAMAGA, the world's principle producer of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each consumer. We value everyone, who worked with us - therefore, our regular clients receive the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Portugal, Iceland, Guinea-Bissau, Laos, Slovenia, Cuba, Turkey, Malaysia, Libya, Brunei, Mali, Guinea, Austria, Liberia, Japan, Czech Republic, East Timor, Montenegro, Jamaica, Central African Republic, Liechtenstein, Uruguay, Malta, South Sudan, Argentina, Iraq, Haiti, Lithuania, Zambia, Uganda, Iran, Fiji, Kenya, Sudan, Sierra Leone, Greece, Ukraine, Pakistan, Kuwait, Algeria, Samoa, Andorra, Tonga. A well-shaped logistics bond and a partnership network guide us to send our goods anywhere in the planet immediately without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is increasing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 15000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 125 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 0,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Mounting: mounting bracket 1821336017 / block assembly kit 1827009593 | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |