We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061407
Description
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822061407, catch up with FAMAGA, the world's foremost vendor of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outcomes and special attention to each purchaser. We understand everyone, who conspired with us - therefore, our regular customers obtain the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Cameroon, Senegal, The Gambia, Liberia, Thailand, Belize, Ecuador, Croatia, Saudi Arabia, Mauritania, Guinea, Gambia, Uruguay, Norway, Netherlands, Armenia, Malawi, Tonga, Liechtenstein, Ireland, Malaysia, Niger, Finland, Uganda, Kiribati, Australia, Iran, Cyprus, Albania, Libya, Cape Verde, New Zealand, Paraguay, Suriname, Laos, Kenya, Zambia, Morocco, Hungary, Chile. A advanced logistics connection and a partnership network assist us to send our elements anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or order, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 65 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Hydraulic shock absorber on rear side are included in scope of delivery |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |