We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822398600
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822398600, make contact with FAMAGA, the world's influential distributor of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each user. We admire everyone, who conspired with us - thus, our regular customers get the most favorable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Peru, South Africa, Nigeria, Panama, Congo, China, Burma, Djibouti, Zambia, Eritrea, Guinea, Singapore, Australia, Jamaica, United Arab Emirates, Japan, Ireland, Andorra, South Korea, Samoa, Bolivia, Turkey, Lithuania, Kuwait, Austria, The Gambia, Belarus, El Salvador, Belize, Mali, Paraguay, Mauritius, Israel, Malta, Costa Rica, Malaysia, Comoros, Guatemala, Mexico, Qatar, Suriname, Morocco. A advanced logistics connection and a partnership network guide us to deliver our products anywhere in the earth as soon as possible without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |