We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176555, call FAMAGA, the world's main vendor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each orderer. We value everyone, who joined with us - so, our regular clients bring in the most beneficial purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Albania, Cambodia, Iceland, United Arab Emirates, France, Cape Verde, Guinea, China, Lithuania, Netherlands, Bhutan, Romania, New Zealand, Philippines, Vietnam, Monaco, Guatemala, Denmark, Poland, Pakistan, Togo, Thailand, Greece, Nepal, Kazakhstan, Georgia, Burkina Faso, Angola, Burundi, Namibia, Austria, Costa Rica, Rwanda, North Korea, Haiti, Qatar, Mexico, Egypt, Afghanistan, Cyprus, Sweden, Suriname. A well-elaborated logistics bond and a partnership network let us to send our goods anywhere in the planet immediately without undermining product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |