We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471317521
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7471317521, reach FAMAGA, the world's the best distributor of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are portrayed in the quality of items and particular attention to each orderer. We admire everyone, who collaborated with us - hence, our regular buyers receive the most beneficial purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Niger, Honduras, United States, Nigeria, Romania, Mali, Guyana, Greece, Mauritania, Belize, Nicaragua, Azerbaijan, Zimbabwe, Kenya, Iceland, Libya, Cape Verde, Bulgaria, Hungary, Zambia, Mauritius, Belarus, Algeria, Morocco, Tanzania, Ghana, Denmark, Cyprus, South Korea, Nepal, Jordan, Indonesia, Togo, Cameroon, Kiribati, Iran, Paraguay, Australia, India, Bosnia and Herzegovina, Sierra Leone. A well-developed logistics network and a partnership network allow us to send our elements anywhere in the world with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this amount is amounting every day. We are happy that users choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |