We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821303303
Description
Parts | Pre-filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 0.3 µm |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 2500 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0821303303, catch up with FAMAGA, the world's main vendor of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and personalseparate attention to each purchaser. We esteem everyone, who collaborated with us - therefore, our regular customers procure the most beneficial purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such customers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the earth Germany, United Kingdom, Uganda, Libya, Paraguay, Eswatini, Bulgaria, Algeria, Armenia, Turkmenistan, Samoa, Cyprus, Kazakhstan, Nepal, Niger, Oman, Jordan, The Gambia, Gambia, Equatorial Guinea, Laos, Fiji, Russia, Lithuania, Cape Verde, Swaziland, Kenya, Ukraine, United Arab Emirates, Kyrgyzstan, Botswana, Montenegro, Finland, Moldova, Iraq, Belize, Chile, Greece, Rwanda, Cameroon, Iran. A advanced logistics chains and a partnership network assist us to deliver our elements anywhere in the planet with no delay without undermining product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been provided, and this number is growing every day. We are happy that users choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Pre-filter, Can be assembled into blocks |
Parts | Pre-filter |
Mounting orientation | vertical |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 25 cm³ |
Filter element | exchangeable |
filter porosity | 0,3 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering | 5 µm |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 2 : - : 3 |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Die cast zinc Polycarbonate |
Filter insert | Impregnated paper |