We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011197
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 7x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412011197, reach FAMAGA, the world's primary vendor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are outlined in the quality of products and personalseparate attention to each purchaser. We admire everyone, who conspired with us - so, our regular clients procure the most desirable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Venezuela, Portugal, Sweden, South Africa, Dominica, Finland, Haiti, Italy, Egypt, Dominican Republic, Bhutan, Cyprus, Czech Republic, Laos, East Timor, Honduras, Indonesia, Burundi, Guinea, Togo, Macedonia, Singapore, Malaysia, Fiji, South Korea, Eswatini, Norway, Mozambique, Niger, Monaco, Bosnia and Herzegovina, Botswana, Guyana, Turkmenistan, Benin, Lithuania, Morocco, Paraguay, Costa Rica, Kyrgyzstan, Latvia, Denmark, El Salvador, Switzerland, Yemen, Seychelles, Nepal, Cape Verde, Georgia, Tunisia. A advanced logistics network and a partnership network let us to send our products anywhere in the planet with no delay without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as to stay on the top.
To consult or order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |