We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822343508
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822343508, make contact with FAMAGA, the world's top company of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each buyer. We value everyone, who cooperated with us - so, our regular clients bring in the most desirable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Spain, Cuba, Uganda, Sri Lanka, Bangladesh, Greece, Sierra Leone, Congo, Chile, France, Romania, Eswatini, Comoros, Finland, Equatorial Guinea, Guinea, Senegal, The Gambia, Singapore, Kiribati, China, Malawi, Andorra, Ecuador, Kyrgyzstan, Vietnam, Bolivia, Libya, Mauritania, Uzbekistan, Gambia, Argentina, Liechtenstein, Fiji, Moldova, Pakistan, Uruguay, Afghanistan, Iraq, Seychelles, Montenegro, United Arab Emirates, Jordan, Ukraine, Thailand, Paraguay, New Zealand, Nigeria, Cameroon, Philippines. A well-developed logistics system and a partnership network assist us to conduct our units anywhere in the globe promptly without disreputing product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that users choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |