We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471324420
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7471324420, make contact with FAMAGA, the world's prime distributor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are portrayed in the quality of products and particular attention to each consumer. We appreciate everyone, who conspired with us - thus, our regular clients get the most acceptable purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such customers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Liechtenstein, Papua New Guinea, Bahamas, Gambia, Afghanistan, Nicaragua, Nepal, Fiji, Malta, Netherlands, Botswana, Sudan, Paraguay, Guyana, Honduras, Armenia, Cameroon, Mauritania, Chile, Croatia, Samoa, Togo, Dominica, Argentina, Brazil, East Timor, Iran, Panama, Indonesia, Switzerland, Kenya, Brunei, Kazakhstan, Algeria, United Arab Emirates, Bangladesh, Tajikistan, Namibia, Cape Verde, Guatemala, Georgia, Mauritius, Malaysia, South Korea, Serbia, Mongolia. A well-shaped logistics bond and a partnership network guide us to deliver our units anywhere in the earth with no delay without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as stay in control.
To consult or place an order, contact us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |