We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822063000, call FAMAGA, the world's leading vendor of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We value everyone, who cooperated with us - therefore, our regular customers obtain the most attractive purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Pakistan, Tanzania, Sri Lanka, Albania, Honduras, Greece, Guyana, Burkina Faso, Slovenia, Cameroon, The Gambia, Sudan, Saudi Arabia, Lithuania, Swaziland, Belarus, Guinea, Bhutan, Israel, Uganda, Montenegro, Eswatini, Costa Rica, Antigua and Barbuda, Zimbabwe, Ukraine, Libya, Malaysia, Kazakhstan, Latvia, Andorra, Malta, Laos, Paraguay, Iceland, Mali, Mauritius, Turkey, Sierra Leone, Slovakia, Samoa, Rwanda, Philippines, Australia, Morocco. A advanced logistics connection and a partnership network guide us to send our goods anywhere in the world on-time without compromising product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |