We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001290
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001290, reach FAMAGA, the world's leading company of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each client. We admire everyone, who cooperated with us - therefore, our regular clients receive the most flexible purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Sweden, Czech Republic, Jamaica, Nepal, Vietnam, Uruguay, Peru, Portugal, Panama, Niger, United States, New Zealand, Cameroon, Tajikistan, Kenya, Ukraine, Bhutan, Malaysia, Kyrgyzstan, Norway, Moldova, Macedonia, Austria, Azerbaijan, Fiji, Belarus, Jordan, Israel, Slovakia, Iran, Turkey, Central African Republic, Iceland, Tanzania, Samoa, Iraq, Suriname, Antigua and Barbuda, Egypt, India, Armenia. A well-elaborated logistics system and a partnership network guide us to conduct our items anywhere in the globe immediately without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that users choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |