We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627481
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 250 mm |
Piston rod thread | M42x2 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480627481, communicate with FAMAGA, the world's influential company of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of spare parts and particular attention to each purchaser. We cherish everyone, who joined with us - thus, our regular purchasers accept the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Indonesia, Turkmenistan, Sweden, Antigua and Barbuda, Kiribati, Andorra, Portugal, Eswatini, Nigeria, Morocco, Saudi Arabia, Grenada, Monaco, Kenya, Peru, Bulgaria, Greece, Uganda, Bangladesh, Argentina, Swaziland, El Salvador, Malta, Central African Republic, Ecuador, Sudan, Tanzania, Croatia, Mozambique, Cameroon, North Korea, Kazakhstan, Denmark, Malaysia, Hungary, Samoa, Finland, Brazil, Bosnia and Herzegovina, Uruguay, Tunisia, Czech Republic, Niger, Ghana, Norway, Algeria, Iraq. A advanced logistics network and a partnership network let us to conduct our products anywhere in the globe on-time without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |