We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471314851
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7471314851, communicate with FAMAGA, the world's top distributor of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are represented in the quality of outcomes and individual attention to each purchaser. We cherish everyone, who collaborated with us - thus, our regular clients accept the most attractive purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Cuba, Bosnia and Herzegovina, Hungary, Guinea, Djibouti, Uzbekistan, Guyana, Turkmenistan, Ghana, Argentina, Bhutan, Azerbaijan, Norway, Kiribati, Liberia, Andorra, Senegal, Uganda, Austria, Belize, Fiji, Slovakia, Burkina Faso, Cameroon, Denmark, Thailand, Mongolia, Peru, Brunei, Antigua and Barbuda, Morocco, Sierra Leone, Guatemala, Greece, Kazakhstan, Armenia, Togo, Brazil, Georgia, Uruguay, Mauritius. A well-elaborated logistics connection and a partnership network allow us to dispatch our elements anywhere in the earth on-time without undermining product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this amount is increasing every day. We are happy that users choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To request or make a request, phone us or write to the online chat on our site. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |