We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627644
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 250 mm |
Piston rod thread | M42x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480627644, make contact with FAMAGA, the world's foremost provider of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each purchaser. We praise everyone, who engaged with us - therefore, our regular buyers accept the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Cuba, Romania, Belgium, Ghana, Turkmenistan, Dominican Republic, Samoa, Tunisia, Jamaica, Cameroon, Uruguay, Kyrgyzstan, Liechtenstein, Malawi, Mongolia, Greece, Jordan, India, Bangladesh, Saudi Arabia, Australia, Andorra, Croatia, Austria, Madagascar, Kenya, Armenia, Equatorial Guinea, Brazil, Guatemala, Syria, Tanzania, Zimbabwe, Malta, Comoros, Hungary, New Zealand, Namibia, Finland, Libya, Vietnam, Bosnia and Herzegovina, North Korea. A well-built logistics network and a partnership network guide us to dispatch our goods anywhere in the globe promptly without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |