We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009002
Description
Parts | Filter |
Condensate drain | fully automatic, closed without pressure |
filter porosity | 5 µm |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 7800 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412009002, contact FAMAGA, the world's chief retailer of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of products and personalseparate attention to each customer. We cherish everyone, who cooperated with us - therefore, our regular clients bring in the most helpful purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Botswana, Macedonia, Colombia, Iceland, Brazil, Jamaica, Australia, Morocco, Namibia, Grenada, New Zealand, Serbia, North Korea, Ghana, Liberia, Liechtenstein, Saudi Arabia, United States, Kyrgyzstan, Djibouti, Pakistan, Bangladesh, Sweden, Mongolia, Sierra Leone, Fiji, Mexico, Eswatini, Tanzania, Rwanda, Algeria, Kazakhstan, Uruguay, Zambia, Armenia, South Korea, Norway, Denmark, Greece, Haiti, Thailand, Central African Republic. A well-shaped logistics series and a partnership network let us to deliver our units anywhere in the earth on-time without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |