We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480041446
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480041446, get in touch with FAMAGA, the world's prime distributor of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and individual attention to each orderer. We appreciate everyone, who conspired with us - so, our regular customers get the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Moldova, Cape Verde, Guinea, Albania, Mauritania, North Korea, Dominican Republic, Cuba, Sweden, Central African Republic, Ireland, Palestine, Netherlands, Dominica, Zambia, Cyprus, Brunei, Guyana, Russia, Monaco, Niger, Comoros, Armenia, Argentina, Costa Rica, Bangladesh, Finland, The Bahamas, Belize, Ghana, Switzerland, Bolivia, Seychelles, Tajikistan, Indonesia, Syria, Pakistan, Serbia, Czech Republic, Togo, Vietnam, Benin, Bosnia and Herzegovina, Morocco, East Timor. A advanced logistics network and a partnership network allow us to deliver our elements anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or place an order, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |