We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342621
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822342621, communicate with FAMAGA, the world's the best retailer of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each client. We appreciate everyone, who liased with us - therefore, our regular clients obtain the most favorable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Jordan, Saudi Arabia, Swaziland, Liechtenstein, Myanmar, Iceland, Malta, Austria, Chile, Eswatini, Madagascar, South Korea, Uzbekistan, North Korea, Liberia, Ireland, Sudan, Sierra Leone, Uganda, Armenia, Thailand, Senegal, Norway, Djibouti, Bangladesh, Tajikistan, Slovakia, Tonga, Cyprus, Paraguay, Burkina Faso, Equatorial Guinea, Afghanistan, Finland, Nigeria, Kyrgyzstan, Ukraine, Vietnam, Argentina, The Gambia, Uruguay, Costa Rica. A well-shaped logistics system and a partnership network guide us to send our items anywhere in the globe immediately without disreputing product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |