We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727415480
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5727415480, connect FAMAGA, the world's key vendor of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of outputs and particular attention to each orderer. We appreciate everyone, who joined with us - so, our regular consumers bring in the most desirable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Afghanistan, Guatemala, El Salvador, Poland, Peru, Tajikistan, Brunei, Denmark, Russia, Netherlands, Liberia, Morocco, Switzerland, Burkina Faso, Yemen, Monaco, Jamaica, Singapore, Pakistan, Georgia, Mali, Serbia, Nicaragua, Fiji, Haiti, Kiribati, Sweden, Sudan, Botswana, Philippines, Eswatini, Swaziland, Iran, Togo, Panama, Cape Verde, United States, Angola, Zimbabwe, Macedonia, Syria, Uruguay, Qatar, Kazakhstan, Mauritania, Seychelles. A well-shaped logistics network and a partnership network allow us to ship our elements anywhere in the world quickly without compromising product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that users choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, phone us or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 40 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |