We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627477
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 250 mm |
Piston rod thread | M42x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627477, catch up with FAMAGA, the world's central distributor of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of spare parts and private attention to each buyer. We esteem everyone, who cooperated with us - thus, our regular consumers obtain the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Barbados, New Zealand, Bhutan, Belgium, Indonesia, Kiribati, Israel, Liberia, Armenia, Iceland, Mauritania, Kazakhstan, Belize, Guinea, Samoa, Rwanda, Serbia, Uganda, Zimbabwe, Kyrgyzstan, Bosnia and Herzegovina, Slovakia, Hungary, Greece, Bangladesh, Botswana, Malta, Senegal, Uruguay, Zambia, Pakistan, Algeria, Dominica, Norway, Ecuador, Eswatini, Yemen, Ghana, El Salvador, Paraguay, Seychelles, Sudan, Guatemala, Laos, Moldova. A well-shaped logistics series and a partnership network let us to ship our products anywhere in the planet on-time without disreputing product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |