We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019888
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20 |
Standardization | ISO 15524 |
Stroke | 40 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412019888, connect FAMAGA, the world's prime distributor of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are outlined in the quality of products and particular attention to each user. We understand everyone, who conspired with us - therefore, our regular customers accept the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Netherlands, Bahamas, Romania, Croatia, Sri Lanka, Burkina Faso, Dominica, Poland, Seychelles, New Zealand, Tajikistan, Cape Verde, Philippines, Ghana, Syria, Libya, Georgia, East Timor, Malta, Angola, Morocco, Sweden, Madagascar, Jamaica, Bulgaria, Finland, Fiji, Tunisia, Afghanistan, Montenegro, United Arab Emirates, Malaysia, Guatemala, China, United States, The Gambia, Russia, Armenia, Haiti, Equatorial Guinea, Bolivia, Iran, Mexico, Swaziland. A well-built logistics system and a partnership network allow us to conduct our goods anywhere in the world as soon as possible without compromising product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To request or order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |