We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820024328
Description
Standardization | ISO 5599-1 |
Frame size | ISO 1 |
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1060 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0820024328, make contact with FAMAGA, the world's major company of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of goods and individual attention to each orderer. We respect everyone, who liased with us - therefore, our regular customers accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such customers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uzbekistan, Liberia, Denmark, France, Czech Republic, Equatorial Guinea, Paraguay, Kazakhstan, Syria, Lebanon, Mongolia, Andorra, Yemen, Algeria, Latvia, North Korea, Iraq, Cyprus, Cameroon, Uganda, Sudan, Turkey, Tonga, Kuwait, Namibia, Malaysia, Bulgaria, Swaziland, Ukraine, Eswatini, Hungary, Iceland, Slovakia, Malta, Antigua and Barbuda, Peru, Burundi, Tajikistan, India, Sweden, Montenegro, New Zealand. A advanced logistics series and a partnership network guide us to conduct our goods anywhere in the globe on-time without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or book, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1060 l/min |
Protection class with connection | IP65 |
LED status display | Yellow |
Nominal resistance | 1480 Ω |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M5 with hexagon socket |
Mounting screw tightening torque | 2,2 Nm |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide |