We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820024326
Description
Standardization | ISO 5599-1 |
Frame size | ISO 1 |
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1060 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820024326, contact FAMAGA, the world's the best producer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each consumer. We praise everyone, who collaborated with us - therefore, our regular buyers bring in the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Turkmenistan, Gambia, Eswatini, Myanmar, Libya, Algeria, Austria, Ghana, East Timor, Burma, Laos, Denmark, Swaziland, Iraq, Madagascar, Tonga, Sierra Leone, Panama, Malta, Bangladesh, Equatorial Guinea, Thailand, Andorra, Nepal, Argentina, Qatar, Senegal, Kuwait, Macedonia, Tanzania, Israel, Mongolia, Chile, North Korea, Tunisia, Albania, Jordan, Burundi, Armenia, Dominica, Bulgaria, Uruguay. A well-developed logistics system and a partnership network guide us to deliver our products anywhere in the globe as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1060 l/min |
Protection class with connection | IP65 |
LED status display | Yellow |
Nominal resistance | 1480 Ω |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M5 with hexagon socket |
Mounting screw tightening torque | 2,2 Nm |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide |