We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2621701110
Description
Standardization | ISO 5599-2 |
Cable exit | straight |
Number of valve positions | 1 |
Frame size | ISO 1 |
Housing | Die-cast aluminum |
Sealing material | Aluminum |
Subbase | Die-cast aluminum |
Number of wires | 4-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1500 l/min |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 3/8 |
Operational voltage AC at 60 Hz | 110 V |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 2621701110, catch up with FAMAGA, the world's top provider of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of goods and personalseparate attention to each buyer. We esteem everyone, who cooperated with us - so, our regular buyers pick up the most desirable purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Seychelles, Russia, Dominica, Samoa, Dominican Republic, Azerbaijan, The Bahamas, Philippines, Armenia, Cyprus, Georgia, Malta, Colombia, Bhutan, Sweden, United Arab Emirates, Morocco, Central African Republic, Kuwait, Macedonia, North Korea, Iceland, Suriname, Estonia, Finland, Nicaragua, Tunisia, New Zealand, Albania, Pakistan, Haiti, Syria, Bolivia, Burundi, Switzerland, Nepal, Yemen, Jamaica, Indonesia, Madagascar, Angola, Poland, United States, Rwanda. A well-developed logistics system and a partnership network cheer us to send our items anywhere in the globe immediately without compromising product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is growing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To ask a question or order, phone us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Standards | ISO 5599-2 |
Compressed air connection | according to ISO 5599 |
Nominal flow Qn | 1500 l/min |
Working pressure min./max. | -0,95 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -14 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 1 |
Direction of pneumatic port (1) | On the side |
Direction of pneumatic port (2,4) | On the side |
Direction of pneumatic port (12) | On the side |
Direction of pneumatic port (14) | On the side |
Exhaust (3,5) | uncollected exhaust |
Exhaust type | Ports separated |
Tightening torque for mounting screws | 3 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die-cast aluminum, painted gray |
Surface | anodized |
Base plate | Die-cast aluminum |
Seal | Aluminum, anodized |