We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006189
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 2100 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412006189, catch up with FAMAGA, the world's leading supplier of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each buyer. We understand everyone, who cooperated with us - thus, our regular buyers receive the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4000 such customers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Congo, United States, Dominican Republic, Liechtenstein, Monaco, Syria, Namibia, Finland, Ecuador, Burkina Faso, Thailand, Seychelles, Mauritania, Israel, Jamaica, India, Mexico, Russia, Malta, Cyprus, Philippines, Bulgaria, Rwanda, Australia, United Arab Emirates, Kuwait, Dominica, Pakistan, Chile, Sweden, East Timor, Albania, Nigeria, Madagascar, Brazil, Latvia, Kiribati, Bolivia, Belarus, Switzerland, Norway, Guatemala, North Korea, Haiti, Malaysia. A well-built logistics chains and a partnership network allow us to deliver our items anywhere in the globe immediately without damaging product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or order, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 2100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 28 cm³ |
Filter element | exchangeable |
Condensate drain | fully automatic, closed without pressure |
Weight | 0,347 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The E11 locking is delivered without a key (see accessories for keys). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate |
Protective guard | Polyamide |
Filter insert | Polyethylene |