We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472D02839
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | EN 61076-2-101 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472D02839, communicate with FAMAGA, the world's primary producer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and particular attention to each buyer. We cherish everyone, who conspired with us - thus, our regular buyers obtain the most convenient purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Liechtenstein, Malaysia, Azerbaijan, Sudan, Finland, Iceland, Syria, New Zealand, Pakistan, Portugal, Liberia, Belgium, Sierra Leone, Myanmar, Nicaragua, Niger, Indonesia, The Bahamas, Japan, Mauritania, Tanzania, Rwanda, Slovakia, Belize, Eswatini, Chad, Ukraine, Czech Republic, Vietnam, Central African Republic, Tajikistan, Kenya, China, Australia, Yemen, Costa Rica, North Korea, Madagascar, Austria, Bosnia and Herzegovina, Paraguay, Comoros, Algeria, Belarus, Mali, Hungary. A well-elaborated logistics chains and a partnership network allow us to send our goods anywhere in the planet on-time without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or place an order, phone us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | EN 61076-2-101 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Protective circuit | TVS diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 14 ms |
Typ. switch-off time | 14 ms |
Mounting screw | M3 |
Weight | 0,12 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |