We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472023181
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472023181, catch up with FAMAGA, the world's leading supplier of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of products and individual attention to each client. We understand everyone, who cooperated with us - hence, our regular clients get the most acceptable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Poland, Turkey, Sri Lanka, Tajikistan, Panama, Papua New Guinea, Finland, Japan, Angola, Rwanda, Monaco, Guyana, Hungary, Slovakia, Netherlands, South Sudan, Suriname, Antigua and Barbuda, Russia, Comoros, Morocco, Egypt, Syria, Qatar, Andorra, Uruguay, Mauritania, Ukraine, Dominica, Equatorial Guinea, Samoa, Peru, Belarus, Yemen, Serbia, Libya, Estonia, Mozambique, Bolivia, Malaysia, Macedonia. A advanced logistics system and a partnership network let us to ship our elements anywhere in the globe promptly without undermining product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |