We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394610
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Standardization | NFE 49004 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822394610, call FAMAGA, the world's the best company of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each buyer. We understand everyone, who conspired with us - hence, our regular customers accept the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Mozambique, Thailand, Italy, San Marino, United Arab Emirates, Slovenia, Samoa, Monaco, The Gambia, Kyrgyzstan, The Bahamas, Nicaragua, Israel, Chile, Japan, Russia, Sweden, Tunisia, El Salvador, Mexico, Suriname, Mauritania, East Timor, Cyprus, Denmark, Central African Republic, Belarus, Macedonia, Syria, Algeria, Pakistan, Albania, Burkina Faso, Swaziland, Peru, Paraguay, Luxembourg, Seychelles, Togo, Qatar, Kiribati. A well-built logistics series and a partnership network cheer us to deliver our items anywhere in the world quickly without undermining product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or order, contact us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |