We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480060031
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480060031, communicate with FAMAGA, the world's principle producer of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of products and individual attention to each consumer. We praise everyone, who cooperated with us - therefore, our regular clients accept the most attractive purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Thailand, Zimbabwe, New Zealand, Albania, Spain, Chad, Syria, Eswatini, Cameroon, Australia, Guinea, Ecuador, Burma, Mali, Austria, Gambia, Tonga, Czech Republic, Indonesia, Kazakhstan, United Arab Emirates, Zambia, Croatia, Brazil, Equatorial Guinea, Haiti, Israel, Denmark, Estonia, Uzbekistan, Tunisia, Montenegro, Iran, China, Egypt, Peru, Mongolia, Ghana, Lithuania, Pakistan, Senegal, Finland, Armenia, Argentina. A well-shaped logistics series and a partnership network assist us to conduct our units anywhere in the globe as soon as possible without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Ø25 not according to ISO 15552 The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. Ø25 not according to ISO 15552 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |