We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472020373
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472020373, catch up with FAMAGA, the world's dominant retailer of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of items and particular attention to each consumer. We esteem everyone, who conspired with us - therefore, our regular consumers pick up the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Equatorial Guinea, Congo, Sierra Leone, Egypt, Belgium, Burundi, Lesotho, Nigeria, Kenya, Slovenia, Iraq, Tonga, Uzbekistan, Israel, Australia, Antigua and Barbuda, Kiribati, Turkey, Dominica, New Zealand, Luxembourg, Slovakia, Togo, Libya, Turkmenistan, Azerbaijan, Montenegro, Armenia, Benin, Tunisia, Norway, Central African Republic, Algeria, Pakistan, Mexico, Guatemala, Brazil, Uruguay, Chile, Burkina Faso, Bangladesh, Mauritania, Namibia, Kyrgyzstan. A well-shaped logistics series and a partnership network guide us to dispatch our goods anywhere in the planet immediately without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is amounting every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as stay in control.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |