We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340506
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822340506, make contact with FAMAGA, the world's top supplier of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each client. We admire everyone, who liased with us - thus, our regular clients obtain the most beneficial purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Guinea-Bissau, Cuba, Paraguay, Japan, Cyprus, Canada, Benin, Peru, Chad, Colombia, Papua New Guinea, Guinea, Djibouti, Madagascar, Haiti, United Arab Emirates, Samoa, East Timor, Singapore, Zimbabwe, Argentina, Mexico, Zambia, Swaziland, Jamaica, Croatia, Sweden, Botswana, Rwanda, Vietnam, Serbia, Guyana, Burundi, Hungary, Iran, El Salvador, Libya, Seychelles, Tajikistan, Afghanistan, Ghana, Georgia, Austria, South Korea, Brunei. A well-shaped logistics series and a partnership network guide us to send our units anywhere in the earth as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |