We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001609
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001609, catch up with FAMAGA, the world's foremost provider of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each orderer. We esteem everyone, who worked with us - thus, our regular clients obtain the most convenient purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Netherlands, Guatemala, Swaziland, Bahamas, Jordan, Tajikistan, Brazil, Albania, Liberia, Croatia, Syria, Jamaica, Nepal, Oman, United Arab Emirates, Nigeria, El Salvador, Botswana, Samoa, The Bahamas, Eritrea, Latvia, Indonesia, Laos, Fiji, Malaysia, Morocco, Zimbabwe, Belarus, Libya, Cyprus, Qatar, Burkina Faso, Finland, Seychelles, Kyrgyzstan, Estonia, Serbia, Afghanistan, Luxembourg, Togo, Greece. A well-elaborated logistics bond and a partnership network guide us to conduct our items anywhere in the world immediately without discrediting product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or order, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |