We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001749
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001749, catch up with FAMAGA, the world's prime supplier of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each consumer. We appreciate everyone, who cooperated with us - so, our regular purchasers obtain the most favorable purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Canada, Yemen, China, Equatorial Guinea, Slovakia, Georgia, Nicaragua, Guyana, Bahamas, Armenia, Zimbabwe, Fiji, Oman, Argentina, Latvia, Netherlands, El Salvador, East Timor, Andorra, Malaysia, Nepal, Eritrea, Brunei, Gambia, Benin, Brazil, Angola, Cyprus, Sweden, Uzbekistan, Seychelles, Thailand, Albania, United States, Russia, Ecuador, Pakistan, Tonga, Qatar, Guatemala, Switzerland, Poland, Macedonia, United Arab Emirates, Peru. A advanced logistics bond and a partnership network guide us to ship our products anywhere in the globe promptly without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |